OVER RUST™ is
applied directly onto the rust. Steel surfaces need only be clean of loose rust scales and
simply power washed clean of oil and debris. Paint should be sanded back to ensure that
OVER RUST™ comes in contact with the rust. That's it!
When first applied, OVER
RUST™ is tan in color, but, when it comes in contact with ferrous metal, an amazing
chemical reaction takes place. This reaction phase causes OVER RUST™ to turn purple.
Then, as it cures, it bonds to the metal and forms a tough, black polymer type coating
that has actually permeated the rust and etched itself directly into the metal. The rust is simply
and quickly absorbed and converted into a Teflon-like coat which then seals as an incredible base coat or primer for virtually any top or finish coat.
This
finished product is paint-ready and guaranteed to offer you years of trouble free
protection.
|
|
|
OVER RUST is applied directly to rusted area. It is
tan in color as it begins to penetrate the rust.
|
Within minutes an amazing chemical reaction occurs as
OVER RUST turns purple and actually absorbs the rust while penetrating down to the metal
surface.
|
OVER RUST turns black as it enters the curing stage.
During the next few hours, OVER RUST forms a tough, polymer coating that has actually
bonded to the metal itself.
|
|
